Select Language
General Requirements
|
|
|
|
Chapter 22 – Zoning OrdinaceSECTION VI. MANUFACTURING DISTRICTS A. General Requirements. [back to top] 1. No lot, parcel, or tract of land shall be used, and no building or structure shall be erected, altered, or remodeled for any of the following uses: abattoirs; manufacture of acid; arsenals; crematories; manufacture of treatment of creosote; fat rendering; manufacture of fertilizer; manufacture or storage of fireworks or explosives; dumping or reduction of garbage, dead animals, offal, or refuse; processing or refining of petroleum; ore reduction; manufacture of nitrocellulous; manufacture of synthetic polymers; manufacture or treatment of gutta percha; salt works; manufacture of sauerkraut; manufacture of soap; smelters; stock yards or slaughter of animals or fowls; manufacture or treatment of tallow, grease or lard; tanning, curing, or storage of rawhides or skins; distillation of tar; or batch asphaltic concrete and Portland Cement concrete mixing plants. 2. No activities involving the storage, utilization, or manufacture of materials or products which decompose by detonation shall be permitted, except such as are specifically licensed by the Village of Addison. Such materials shall include but shall not be confined to all primary explosives such as lead azide, lead styphnate, fulminates, and tetrocene; all high explosives such as TNT, RDX, HMX, PETN, and picric acid; propellants and components thereof such as cellulose nitrate of a nitrogen content of 12.5 percent or greater, black powder, boron hydrides, hydrazine, and its derivatives; pyrotechnics and fireworks such as magnesium powder, potassium chlorate and potassium nitrate; blasting explosives such as dynamite and nitroglycerine, unstable organic compounds such as acetylides, tetrazoles, perchloric acids; perchlorates, chlorates, hydrogen peroxide in concentrations greater than 35 percent and nuclear fuels, fissionable materials, and products and reactor elements such as Uranium 235 and Plutonium 239. 3. Within 300 feet of a residential district boundary line, parking for vehicles in operable condition and off street loading and unloading spaces shall be located in accordance with requirements set forth in Section VIII. 4. No building, structure or land within 100 feet of any lot line of a lot located in a residential district shall be used in connection with the operation, including Manufacturing or Storage of any manufacturing establishment; provided however, a variance may be permitted reducing such distance to 50 feet if the conditions of Section VI.A.8 herein are met. This section will apply only to new construction or additions to existing buildings. (88-17) 5. Any use establishment in a Manufacturing District hereinafter shall be operated in such manner as to comply with applicable performance standards as hereinafter set forth governing noise, smoke, particulate matter, toxic of noxious matter, odors, fire and explosive hazards, or vibration, or glare or heat. Certification from a properly certified testing laboratory, approved by the Village Board, may be required to indicate compliance with applicable standards. (88-17) 6. [Reserved for future use.] 7. Outside Storage a. Outside storage in M-1 Districts is prohibited. b. Outside storage is prohibited in M-4 Districts unless specifically permitted in P.U.D. agreements approved by the Village Board. c. Outside storage in M-2 Districts shall be permitted subject to the following restrictions: (1) Outside storage is prohibited in front yards and forward of the principal building. (2) Outside storage is prohibited in any yard within 100 feet of any lot line of a lot located in a residential district, except as provided in Section VI.A.4 hereof. (3) Outside storage is prohibited in required side yards (see definition of required yard). (4) Outside storage is prohibited on driveways, on required parking areas, and on fire lanes. (5) Outside storage of flammable or combustible material is prohibited within 30 feet of any electric transmission tower or within 30 feet of any land directly under electric transmission tower power lines. (6) Outside storage of any material on a lot or right of way being used for electric transmission towers shall be limited to 8 feet in height and must be 10 feet from towers. (7) Outside storage is prohibited on utility, railroad or other rights of way unless (a) the right of way is adjacent to a lot which is fully improved with a principal building and (b) the lawful occupant of the principal building (either owner or tenant) on said adjacent lot is utilizing the right of way for outside storage incidental to use of the principal building. In addition, outside storage on rights of way shall not be permitted forward of the adjacent principal building nor forward of the building setback line, and outside storage on rights of way shall be screened from normal view from all streets. (8) Outside storage is prohibited on a vacant lot unless (a) the vacant lot or right of way is adjacent to a lot which is fully improved with a principal building and (b) the lawful occupant of the principal building (either owner or tenant) on said adjacent lot is utilizing the vacant lot for outside storage incidental to use of the principal building. In addition, outside storage on a vacant lot shall not be permitted forward of the adjacent principal building nor forward of the building setback line, and outside storage on a vacant lot shall be screened from normal view from all streets. (9) Development plans shall be submitted with outside storage variation applications. (10) Outside storage is permitted in rear yards except as specifically prohibited. (11) All outside storage shall comply with the following: (a) Storage is prohibited within 10 feet of any exterior door. (b) Combustible and flammable material cannot be stored within 10 feet of any exterior window. (c) Outside storage is prohibited in rear yards 10 feet or less from the rear lot line in order to permit emergency vehicle access; provided, however, outside storage may be permitted in such areas if equal or better access for emergency vehicles is otherwise provided. (d) All storage of materials shall be confined to areas improved with concrete, asphalt or gravel properly drained and approved by the Village Engineer. (e) Storage in trailers or other vehicles shall be limited to those vehicles in road-worthy condition displaying current vehicle registration and a valid safety sticker; provided, however, construction trailers being used on a lot which is being improved under a valid building permit issued by the Village of Addison are permitted. (f) All outside storage shall be screened from normal ground level view of any residential lot. (g) All screening required in this section shall be maintained by the property owner as follows: (i) Fences and decorative walls shall be maintained in a structurally sound condition. (ii) Plantings, i.e., trees and hedges, shall be maintained at effective height and density. (iii) Screening shall be installed and maintained entirely on properties zoned manufacturing. (iv) Repair or maintenance shall be performed or under contract within 30 days of notification by the Village of Addison. (h) Maximum permitted height of storage is 14 feet. No material shall be stored on a lot in such a manner that it might be transferred off the storage area by natural causes. (i) Outside storage of hazardous material must be contained in a manner which prevents any release which could result in exposure of the general public or the environment to such material. (j) Hazardous chemicals/materials must be properly identified and labeled at all times while residing in the outside storage area. (k) The storage within any flood plain of materials that are buoyant, flammable or explosive, or which are determined by the Village Engineer to be dangerous to life, health or property in time of flooding is prohibited, unless such materials are located above the flood limit elevation for the area in which such materials are to be located. (88-17) (12) Outside storage of any vehicle being serviced by an automobile repair shop is limited to the interior side yard and the rear yard of the repair shop premises If the vehicles being serviced are screened so that they are not visible to adjacent properties, the public roadway, or the general public, then the outside storage of a vehicle being serviced shall be permitted for not more than 6 months. If the vehicles being serviced are not screened in the manner heretofore provided, then the outside storage of a vehicle being serviced shall be permitted for no more than 7 days. (02-01) d. Outside storage of a substance or material in a quantity and form which, by determination of the Village in reference to applicable state and federal environmental and health standards, is deemed an unreasonable risk to health and safety or property shall be terminated within the time period stated in the notice to any person that owns, leases, operates or controls the property or business where the storage is taking place. e. Outside storage in M3 Districts shall be the same as in M2 except as permitted under special use permit or variation. f. The provisions of Section 7.c.1 apply to any lot improved prior to April 16, 1973 and having its principal use established, except in the following instances: That a corner lot having its principal use established with the building set back from one of the two front yard building lines may use that area for outside storage. 8. Outside Storage Variations. a. Variations of the provisions of Section VI.A.7 may be permitted with respect to outside storage pursuant to Section IX.A.2.b.14. 9. All existing, nonconforming uses for outside storage shall be amortized over a period of two years from the effective date of this ordinance. At the end of said two-year period, all nonconforming uses for outside storage shall be terminated unless otherwise permitted by variation or as a special use. (88-17) 10. In all Manufacturing Districts, a variation may be granted to allow fences forward of the principal building but not forward of the building setback line. This fencing shall be subject to Addison Fire Protection District and Addison Police Department review and subject to the approval of the Village Engineer. This fencing shall be of chain-link type of suitable aesthetic substitute, with low plantings to augment it but not to obscure visibility for security purposes and safety, all to be approved by the Village Engineer. (89-19) B. Performance Standards. [back to top] 1. Noise Performance Standards. Sound levels shall be measured with a precision sound level meter and associated octave band filter manufactured according to the American National Standards Institute or its successor bodies. Measurements shall include steady sound. a. During the hours of 7:00 A.M. to 10:00 P.M., local time, no person shall cause or allow the emission of sound from any property-line-noise source located in any Manufacturing or Business District to any receiving Residential District which exceeds any allowable octave band sound pressure level specified in the following table, when measured at any point within such receiving Residential District, provided, however, that no measurement of sound pressure levels shall be made less than 25 feet from such property-line-noise source.
(86-20; 14-66) 2. Vibrations - M1, M2 and M3 District. No industrial operation or activity (except those not under the direct control of the manufacturer) shall cause at any time ground transmitted vibrations in excess of the limits set forth below. Vibration (the periodic displacement, measured in inches, of earth) shall be measured at any point along a Residence District boundary line with a three-component measuring instrument approved by the Village Board, and shall be expressed as displacement in inches.
(86-20) 3. Smoke and Particulate Matter - M1, M2 and M3 Districts. The emission of smoke or particulate matter in such manner or quantity as to endanger or to be detrimental to the public health, safety, comfort, or welfare is hereby declared to be a public nuisance, and shall henceforth be unlawful. For the purpose of grading the density of smoke, the Ringelmann Chart, published and used by the United States Bureau of Mines, shall be employed. The emission of smoke or particulate matter of a density greater than No. 2 on the Ringelmann Chart is prohibited at all times except as otherwise provided hereinafter. The emission from all sources within any lot area of particulate matter containing more than 10 percent by weight of particles having a particle diameter larger than 44 microns is prohibited. Dust and other types of air pollution, borne by the wind from such sources as storage areas, yards, roads, and the like, within lot boundaries shall be kept to a minimum by appropriate landscaping paving, oiling, fencing, or other acceptable means. Emission of particulate matter from such sources in excess of the weight limitation hereinafter specified is prohibited. a. Smoke - M1 District. The emission of more than 8 smoke units per hour per stack is prohibited, including smoke of density in excess of Ringelmann No. 2. However, during one one-hour period in each 24-hour day, each stack may emit up to 16 smoke units when blowing soot or cleaning fires. Only during fire-cleaning periods, however, shall smoke of Ringelmann No. 3 be permitted, and then for not more than three minutes. b. Smoke-M2 and M3 Districts. The emission of more than 16 smoke units per hour per stack is prohibited, including smoke of a density in excess of Ringelmann No.2. However, during two one-hour periods in each 24-hour period, each stack may emit up to 24 smoke units, twice for blowing soot and twice for cleaning fires. During fire-cleaning periods only shall smoke of a density of Ringelmann No. 3 be permitted, and then for not more than four minutes per period. 4. Toxic or Noxious Matter - M1, M2 and M3 Districts. No use shall for any period of time discharge across the boundaries of the lot wherein it is located toxic or noxious matter in such concentrations as to be detrimental to or endanger the public health, safety, comfort, or welfare or cause injury or damage to property or business. 5. Odors - M1, M2 and M3 District. The emission of odorous matter shall be controlled in such a manner as to be at or below the odor threshold value within any part of a Residence District. 6. Fire and Explosive Hazards - M1, M2 and M3 Districts. a. M1 District. (1) The storage, utilization, or manufacture of solid materials or products ranging from incombustible to moderate burning is permitted. (2) The storage, utilization, or manufacture of solid materials or products ranging from free or active burning to intense burning is permitted provided the following conditions are met: (a) Said materials or products shall be stored, utilized, or manufactured within completely enclosed buildings or structures having incombustible exterior walls and handled in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (b) All such buildings shall be set back at least 40 feet from all lot lines or in lieu thereof, shall be protected throughout by an automatic fire extinguishing system installed in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (3) The storage, utilization, or manufacture of flammable liquids or materials which produce flammable or explosive vapors, shall be permitted in accordance with the following limitations--exclusive of storage in underground tanks and exclusive of storage of finished products in original sealed containers: (a) Said materials or products shall be stored, utilized or manufactured within completely enclosed buildings or structures having incombustible exterior wall and handled in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (b) All such buildings shall be set back at least 40 feet from all lot lines or in lieu thereof, shall be protected throughout by an automatic fire extinguishing system installed in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (c) The capacity of flammable liquids in excess of the following quantities shall not be permitted.
b. M2 and M3 Districts. (1) The storage, utilization, or manufacture of solid materials or products ranging from incombustible to moderate burning is permitted. (2) The storage, utilization or manufacture of solid materials or products ranging from free or active burning to intense burning is permitted provided the following conditions are met: (a) Said materials or products shall be stored, utilized, or manufactured within completely enclosed buildings or structures having incombustible exterior walls and handled in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (b) All such buildings shall be set back at least 20 feet from all lot lines in lieu thereof, shall be protected throughout by an automatic fire extinguishing system installed in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (c) Said materials may be stored outdoors in conformance with the standards and regulations of the Village of Addison and the National Fire Protection Association. (3) The storage, utilization, or manufacture of flammable liquids or materials which produce flammable or explosive vapors shall be permitted in accordance with the following limitations--exclusive of storage in underground tanks: (a) Said materials or products shall be stored, utilized or manufactured within completely enclosed buildings having incombustible exterior walls, or may be stored out of doors, and handled in accordance with the standards and regulations of the Village of Addison and the National Fire Protection Association and, in addition, all such buildings shall be set back at least 25 feet from all lot lines or in lieu thereof shall be protected throughout by an automatic fire extinguishing system installed in accordance with the standards and regulations at the Village of Addison and the National Fire Protection Association. (b) The capacity of flammable liquids in excess of the following quantities shall not be permitted:
a. Glare - Heat - M1 District. Any operation producing intense glare or heat shall be performed within a completely enclosed building in such a manner as not to create a public nuisance or hazard along lot lines. b. Glare - Heat - M2 and M3 Districts. Any operation producing intense glare or heat shall be performed within an enclosure in such a manner as not to create a public nuisance or hazard along lot lines. (14-66) C. M1 Limited Manufacturing District. [back to top] 1. Permitted Uses. a. The following uses are permitted, provided they conform with regulations herein set forth in Section V.A and V.B of this ordinance; when specifically required by the Village Board, they shall conform with applicable requirements set forth in General Requirements and Performance Standards of this section. (1) Animal hospitals (2) Automobile service stations (3) Building material sales - with outside storage (4) Contractor’s shops - with outside storage (5) Frozen food lockers (6) Fuel and ice sales - retail only with outside storage, except ice sales may be wholesale (7) Garages - public (8) Greenhouses, wholesale - without restrictions as to floor area, provided heating plant conforms with applicable performance standards set forth under General Requirements of this section (9) Heliports - provided they conform with applicable Federal, State and other local governmental regulations (10) Machinery sales and service (11) Monument sales (12) Motor vehicle and equipment sales and service (13) Open - sales lots (14) Parking lots - commercial (15) Public utility and public service uses including: (a) Electric substations and distribution stations (b) Railroad right-of-ways (c) Telephone exchanges, microwave relay towers, and telephone transmission equipment buildings (d) Public transportation facilities, including shelters, terminals, parking areas, and service buildings (e) Water filtration plants, pumping stations, reservoirs, and sewage treatment plants - public (Ord. 12-50) b. Manufacturing, fabricating, storing, cleaning, testing, assembling, repairing, or servicing establishments as determined by operations conforming with performance standards for M1 Districts and other regulations as set forth in Section VI, A and B of this ordinance. 2. Special Uses. a. Planned developments, manufacturing - on tracts of land not less than 10 acres in area. See Section VII. b. Half-way houses and after-care centers for the treatment of alcohol or substance abuse. (Ord. 89-81) 3. Lot Width. Not less than 70 feet. 4. Floor Area Ratio. a. Not to exceed 0.50 for one-story buildings. b. Not to exceed 1.00 for buildings containing two or more stories. 5. Front Yard. Not less than 40 feet in depth. 6. Side Yards. Not less than 20 feet in width. D. M2 General Manufacturing District. [back to top] 1. Permitted Uses. a. Uses as permitted in the M1 District. b. Adult uses, but not within 1,000 feet of any residential area. (89-60) c. Currency exchanges. (12-50) d. Manufacturing, assembling, disassembling, fabricating, repairing, storing, cleaning, servicing or testing establishments as determined by operations conforming with performance standards for M2 Districts as set forth in Section VI.B of this ordinance. e. Non-passenger vehicle renting or leasing. (Non-passenger vehicle rental or leasing shall include any of the following: truck, boat, motorcycle, golf cart, other motorized conveyance, or towed trailer of any kind. (07-81) f. Precious metal and gem dealers. (09-60) g. Pawnbrokers. (09-60) h. Pay day loan services. (12-50) i. Title loan offices. (12-61) j. Registered medical cannabis dispensing organization.* (13-59) k. Registered medical cannabis cultivation center.* (13-59) l. Resale shops, rummage shops and second-hand goods stores. (14-66) m. No more than 0 Licensed Adult Use Cannabis Cultivation Centers. (19-72)
n. No more than 2 Licensed Adult Use Cannabis Dispensing Organizations. (19-72)
Any use permitted under Subparagraphs VI.D.1.m and n above shall be open for business between the hours of 10:00 a.m. and 10:00 p.m. only. (19-72)
No Cannabis Business Establishment shall be located within two-hundred and fifty (250) feet of any residential structure. (19-72) (Ord. No. 12-50) _______________ *Subject to 401 ILCS 130/1 et seq. 2. Special Uses. a. As allowed in M1 District. b. Office building not to exceed 5 stories or 65 feet, whichever is less. c. Employment or temporary staffing agency, including day labor staffing. (02-01; 06-126) d. Restaurants, including sale of alcoholic beverages. e. Clinics and related medical facilities. (81-14) f. Banks, savings and loans and other financial institutions. (85-28) General Requirements Under Special Use, a site plan shall be submitted and approved by the Planning and Zoning Commission and Village Board. The site plan shall indicate location and height of all buildings, driveway locations and off-street parking. 3. Floor Area Ratio. a. Not to exceed 0.60 for one-story buildings. b. Not to exceed 1.20 for buildings, containing two or more stories with maximum lot coverage of 60 percent. 4. Lot Width. Not less than 100 feet. 5. Front Yards. Not less than 27 feet in depth. Except that in Special Use granted under the provisions of this section, the depth of front yard shall be increased by one foot for each two feet of permitted building height over 30 feet. (See Height Limitations Special Use) 6. Side Yards. Not less than 10 feet in width. For a side yard abutting a residential district, see Section VI, A, 3 and 4. In addition, the following requirements will apply to a Special Use granted under the provisions of this ordinance: a. The width of a side yard shall be increased by one foot for each two feet of permitted additional building height over 30 feet. b. Office building not to exceed 5 stories or 65 feet, whichever is less. c. Employment or temporary staffing agency, including day labor staffing. (02-01; 06-126) d. Restaurants, including sale of alcoholic beverages. e. Clinics, and related medical facilities. (81-14) f. Banks, savings and loans and other financial institutions. (85-28) 7. Rear Yards. Not less than 10 feet in depth. A rear yard abutting a residential district shall be governed by provisions in Section VI, Manufacturing Districts, A, 3 and 4. The following will be required in addition, if permit is granted under Special Use provisions of this ordinance: a. The depth of a rear yard shall be increased by one foot for each two feet of permitted additional building height over 30 feet. 8. Building Height. Shall not exceed 30 feet measured at the curb line or two stories, whichever is lower, except that the buildings not exceed 65 feet or five stories, whichever is lower, may be permitted under the Special Use provisions of this ordinance. 9. Off-Street Loading. Loading berths in accordance with provisions set forth in Section VIII of this ordinance. 10. Off-Street Parking. Parking spaces in accordance with provisions set forth in Section VIII of this ordinance. E. M3 General Manufacturing District. [back to top]
1. Permitted Uses.
a. Uses as permitted in the M2 District except for registered medical cannabis dispensing organizations, registered medical cannabis cultivation centers, licensed adult use cannabis dispensing organizations and licensed adult use cannabis cultivation centers which shall be prohibited in the M3 District. (19-72)
b. Manufacturing, assembling, disassembling, fabricating, repairing, storing, cleaning, servicing, or testing establishments as determined by operations conforming with performance standards for M3 Districts as set forth in Section VI of this ordinance. 2. Special Uses. As allowed in the M2 District. 3. Floor Area Ratio. As in the M2 District. 4. Lot Width. Same as in M2. 5. Yards. As in the M1 District. 6. Building Height. Building height shall not exceed 45 ft. measured at the curb, or three stories, whichever is lesser. 7. Off-Street Loading. Loading berths in accordance with provisions set forth in Section VIII of this ordinance. 8. Off-Street Parking. Parking spaces in accordance with provisions set forth in Section VIII of this ordinance. F. M4 Office-Research/Industrial District. [back to top] 1. Purpose. The Planned Office-Research/Industrial District is an incentive zoning district intended to provide for office-research and nuisance-free industrial uses in a well-designed and maintained environment. This district would be less intense in character than the M1 Limited Manufacturing District while providing a broader base of services to meet the needs not only of those working within the district, but also of the general public. Ancillary limited commercial uses such as hotels, restaurants and health clubs may be located in the district where access is available from the rest of the district and the surrounding road network. Development in the district is to be characterized by innovative planning to provide a campus-like environment; spacious building sites with extensive setbacks; controlled ingress and egress; permanent landscaping of open spaces; and screening necessary to maintain a proper relationship with adjacent areas. (83-73) 2. General Requirements. The following general requirements, performance standards, uses, bulk regulations and development standards shall apply to all development in the Planned Office-Research/Industrial District, except for such variations as may be permitted by the Board of Trustees: (96-47) a. No district shall be established under this classification unless it is a compact, contiguous parcel of land, not less than 20 acres in size and under unified ownership or control at the time such district is established; or unless it is contiguous to an established Planned Office-Research/Industrial District and is at least five acres in size. b. No lot, parcel, or tract of land shall be used and no building or structure shall be erected unless a Special Use Permit for a Planned Unit Development is granted in accordance with the following standards: (1) A Planned Development shall conform to all requirements of Section VII and Section VI. A, except that where there is a conflict between the requirements contained in this section and other requirements, the requirements of this section shall govern. (2) A Planned Development may consist of conventionally subdivided lots to be sold; undivided single ownership; separate condominium units; or other ownership methods, provided that any instrument by which the Planned Development is established shall be binding in perpetuity on all property within the Planned Development. (83-73) (3) A Planned Development may consist of separate phases or units, provided that no more than four phases or units shall be permitted; no phase or unit shall be less than four acres in size; and a separate final plan shall be submitted for each phase or unit. c. Notwithstanding the foregoing, no outside storage shall be permitted in the district, and no variation to allow any outside storage may be granted. (96-47) 3. Performance Standards. Uses in the Planned Office-Research/Industrial District shall be limited to those uses which will not create any dangerous, injurious, noxious or otherwise objectionable conditions. Neither will they create any fire, explosive, radio-active or other kind of hazardous conditions, nor will they produce noise, vibrations, smoke, dust, odor or other forms of air pollution, electrical disturbances, glare, heat or any other condition, substance or elements that are in a manner or amount so as to adversely affect the community will not be permitted. All uses in the district shall operate in conformance with the following standards: a. Noise. No noise from operations (other than that emanating from vehicular traffic), either continuous or intermittent, shall be detectable at the limits of the tract or parcel on which the use is located. b. Glare or Heat. No glare or heat shall be detectable at the limits of the tract or parcel on which the use is located. c. Vibrations. No vibrations shall be detectable at the limits of the tract on which the use is located. d. Toxic Matter, Odors, Particulate Matter. No toxic matter, noxious matter, smoke or gas, and no odorous or particulate matter shall be detectable at the limits of the tract on which the use is located. e. Fire and Explosive Hazards. Materials that present potential fire and explosive hazards shall be stored and used only in conformance with the requirements of Section VI.B.6. f. Radiation Hazards. Materials that present potential radiation hazards shall be stored and used only in conformance with the most restrictive of the applicable municipal, state and federal regulations. g. Electromagnetic Interference. Electromagnetic interference shall not adversely affect the operation of any equipment other than that belonging to the creator of such interference, and must conform to the regulations of the Federal Communications Commission. 4. Permitted Uses. a. Artwork, commercial graphics and drafting services. b. Bingo parlors. c. Bookbinding, engraving, lithographing, photoengraving, printing, and publishing. d. Blueprinting and photostating and photocopying services. e. Banks, savings and loan associations, and other financial service offices. f. Clinics, medical and dental with related stress�€‘testing and examination facilities; and facilities for education in preventive medicine. g. Public and private clubs and lodges, including health clubs and related recreation facilities. h. Hotels and motels with related retail and service facilities as defined in sections below. i. Laboratories for research and development, including testing of products. j. Business offices such as corporate headquarters, district, branch, sales, insurance, real estate, advertising, computer facility and other similar business offices. k. Professional offices such as medical and dental offices and clinics, legal offices, certified public accountants and other similar professional offices. l. Governmental offices, but not including vehicular maintenance or service buildings. m. Sales offices, with incidental repairs and service, for business and office equipment and supplies with incidental storage of parts and supplies not to exceed a storage area of 100 percent of the gross square foot area of the sales area and offices. n. Wholesale sales, showrooms, displays and offices but not including storage or warehousing. o. Restaurants, but excluding drive-through and drive-in restaurants. p. Business and professional schools; data processing, electronic, and corporate training-facilities; and other similar educational and training facilities. q. Public service uses such as electric and telephone substations, but not including transmitting or receiving towers or microwave facilities as a principal use. r. Radio and television studios but not including broadcasting towers. s. Theaters, indoor. t. Retail and service uses, limited to barber and beauty shops; drug stores; gift shops, newspaper, tobacco and candy stores; office supply stores, travel agencies; car rental services with storage of no more than five automobiles (no maintenance or washing of these vehicles allowed on site); and valet services. These uses shall be located within a hotel, motel or office building; shall not occupy more than 25 percent of the gross ground floor area of such building; and shall not have a separate exterior entrance or any exterior sign. u. Accessory uses. v. Assembly, fabrication, and processing of goods, materials or products, providing that all operations of the establishment shall conform to the performance standards for the district, and further provided that before issuing any occupancy permit, the Planning and Zoning Administrator shall be given information by the applicant sufficient to enable the Planning and Zoning Administrator to determine that all the performance standards of this section can and will be complied with at all times. At the request of the Planning and Zoning Administrator, the applicant shall provide: (1) A plot plan showing the location of all present and proposed structures, waste disposal areas and other construction features relevant to the proposed operations. (2) A description of the activity to be conducted in sufficient detail to indicate the extent to which the proposed operation will produce waste products, conditions, or external effects which are regulated or otherwise limited by this section. (3) A description of the type and location of any abatement devices, waste disposal measures or recording instruments used to control or measure conformity with any of the standards set forth herein. (4) Such other data and certification as may reasonably be required by the Planning and Zoning Administrator to reach a determination. All information and evidence submitted in application to indicate conformity with the performance standards set forth herein shall constitute a certification and an agreement on the part of the applicant that the proposed use can and will conform to such standards at all times. w. Registered medical cannabis dispensing organizations; (19-72) x. Registered medical cannabis cultivation center; (19-72) y. No more than 0 Licensed Adult Use Cannabis Cultivation Centers; (19-72) z. No more than 0 Licensed Adult Use Cannabis Dispensing Organizations. (19-72) Any use permitted under Subparagraphs VI.D.1.m and n above shall be open for business between the hours of 10:00 a.m. and 10:00 p.m. only. (19-72) No Cannabis Business Establishment shall be located within two-hundred and fifty (250) feet of any residential structure. (19-72) 5. Floor Area Ratio. The maximum floor area ratio shall be 0.50, except that where at least 50 percent of the required off-street parking spaces are provided within a structure, the maximum floor area ratio may be increased to 0.70. 6. Lot Area and Width. Each lot, parcel or tract shall have a minimum area of two acres and a minimum lot width of 200 feet. 7. Yards. No building or structures shall be located closer than 40 feet to any lot line, except that: a. No building or structure shall be located closer than 75 feet to any right-of-way line of a major street as designated on the official Map of the Village. b. No building or structure shall be located closer than 100 feet to any property line abutting a residential district. c. An additional setback of one foot from all property lines shall be provided for each two feet by which the building or structure exceeds 35 feet in height, and for each one floor by which the building or structure exceeds 65 feet in height. 8. Building Height. The maximum building height shall be five stories, but not more than 65 feet, provided that: a. On a lot or parcel of five acres or more, a maximum building height of eight stories or 105 feet may be allowed. b. No chimney, cooling tower, mechanical appurtenances, or other rooftop structure shall extend above the maximum permitted building height. c. All cooling towers, mechanical equipment or appurtenances, vents, intakes or stacks, or other rooftop structures, except for electronic transmitting and/or receiving equipment, shall be screened from view on all sides of the building by a parapet wall, solid sight screen or other means which shall completely conceal the rooftop structures from view. A chimney constructed of the same masonry as the exterior of the building is excepted but a chimney of any other material must be screened. The screens shall comply with all building code requirements for fire rating, wind loads and structural integrity. 9. Development Standards a. Storm Water Detention/Retention. Every Planned Office Research/Industrial District shall provide for facilities to control storm water runoff from the site in accordance with the requirements of the storm water control ordinances of the Village of Addison. b. Landscaping (1) All yards and open space between and about buildings, structures, off-street parking and loading areas, and areas along exterior and interior streets within the Planned Office-Research/Industrial District shall be landscaped. All landscaping shall be properly and continually maintained by the owner and/or tenant of the premises. (2) All on-site retention areas shall have permanent landscaping installed above the permanent water level, and such landscaping shall be suitable to accommodate projected fluctuation in the water level. (3) Where any side or rear yard abuts a residential district, a buffer strip improved with earth berms and full landscaping, shall be provided and maintained along the lot lines abutting such residential districts, to a height depending on the finished grades of the abutting residential property in relationship to the proposed building height and finished grades of the new development. The width of the buffer strip shall be 25 feet, except that where a building or structure exceeds 65 feet in height, the width of the buffer strip shall be 40 feet. (4) Fencing may be allowed within the landscaped areas, provided that the architectural character of the fencing is compatible with the principal structure, and the fencing is constructed of architectural materials such as masonry or ornamental iron. (5) Landscaping within off-street parking area shall be provided in the ratio of one planting area of at least 200 square feet for every 20 parking spaces. The spacing and plant material of the planting area shall be subject to approval as part of the overall landscape plan for the parcel. c. Lighting. All exterior lighting, parking lot lights, exterior building lights, and landscape lighting shall be directed away from adjoining highways, streets, and properties. No direct light from any lighting within a Planned Office-Research/Industrial District shall be cast on any property in a residential district. d. Refuse and Trash Collection Areas. Refuse or trash collection areas shall be provided within a structure at the rear of each structure or positioned in or near a common parking lot or a driveway. Such areas shall be completely screened from view on all sides, with solid fencing of either wood or masonry construction, to a height of 6 feet and shall include concrete pad and an operable door of adequate width. Each such refuse area shall be the responsibility, either separate or joint, of the owners and/or manager of the structure to ensure that the refuse areas are kept in a neat and well-ordered manner at all times. The owner and/or manager of the structure shall ensure that any spillover at the time of refuse removal is promptly and properly cleaned up and that refuse is removed on a regular basis. e. Off-Street Parking and Loading. Off-street parking and loading facilities shall be provided in accordance with the requirements of Section VIII, except that: (1) No off-street parking shall be located closer than 40 feet to any residential district or located within any front yard. (2) Trucks and semi-trailers shall not be parked or stored out-of-doors overnight in the parking lot or on the premises, except within an enclosed loading dock, garage, or within a walled and gated sight screen enclosure, open to the sky, constructed of the same masonry exterior materials as the principal building and equal in height to the height of the first floor of the principal building. However, temporary parking overnight, not to exceed a 48-hour time period, may be permitted for delivery vehicles which arrive after normal business hours. (3) No off-street loading facilities shall be located within 40 feet of any lot line and shall be screened from view from any residential district by a permanent masonry wall. 10. Development Plans. a. An applicant for a Planned Office-Research District shall prepare and submit a Development Plan for approval as part of the Special Use Permit for a Planned Development as provided in Section VII. The plan shall include all property within the proposed Planned Office-Research/Industrial District, shall be drawn to scale, and shall show the existing topography with contour intervals not greater than one foot. The plan shall show existing and proposed streets and other public ways or public property, lots, boundaries, building sites, setbacks, and areas of building sites. If the Planned Office-Research/Industrial District is to be subdivided, the plan shall be accompanied by a plat giving the full information as required by the subdivision regulations of the Village. The Development Plan shall also include: (1) A landscaping plan showing all proposed landscaping, fencing and screening, including location, size and varieties of plant material and location and elevations of terms. (2) A drainage plan showing preliminary grading and preliminary design of all on-site storm water control facilities. Where a donation for off-site storm water control facilities is in lieu of on-site facilities, the engineering evaluation and appraisal report in contingency with the Storm Water Control Ordinance shall be submitted with the Development Plan. b. Where stages of development may be contingent on the scale or lease of lots, the applicant shall indicate on the plans the anticipated stages of development to be followed. If it is to be developed for single occupancy the applicant shall, if known, indicate on the plan the stages and sequence which will be followed in construction. The plan shall also be accompanied by all private covenants or restrictions by which development within the district shall be governed. (83-73) SECTION VII. PLANNED DEVELOPMENTS Planned developments are of such substantially different character from other special uses that specific and additional standards and exceptions are hereby established to govern the recommendations of the Planning and Zoning Commission and the action of the Village Board of Trustees. (12-06) A. Planned Development. [back to top] A planned development is a use of land which offers benefits to the neighborhood of which it is a part or to the general public welfare beyond those required by this Zoning Ordinance and which use of land will contain or provide amenities not otherwise required by law, including but not limited to provisions for common open space, recreational facilities, or specific design, engineering, architectural, site planning or landscape features. B. Application for Preliminary Approval of a Planned Development Special Use Permit. [back to top] Any person or persons owning lots or land within the Village or any person or persons owning lots of land outside the Village coming in under a pre-annexation agreement may apply to the Planning and Zoning Commission for preliminary approval of a planned development special use permit. The Planning and Zoning Commission shall hold a public hearing on the application and may approve or disapprove an application or make recommendations to the Village Board, regarding changes or revisions that it deems desirable. Following Village Board approval, which shall be valid for two years, the applicants may proceed with the preparation of the Final Planned Development. (12-06) C. Final Approval of a Planned Development Special Use Permit. [back to top] The procedure for securing final approval shall be the same as in B. above, but the plans shall be in more detail. Final approval for each unit of the development as delineated in the preliminary approval by the Village Board shall be valid for one year. There shall also be submitted with the final plan, a written agreement of restrictions signed by the owners of the planned development, assuring the Village that the development will be carried out in full compliance with the final plan and within the time schedule of construction submitted with the final plan. D. General Standards. [back to top] A planned development shall conform to the following requirements: 1. The number of dwelling units erected shall not exceed the number permitted by the regulations of the district in which it is located unless an exception is permitted as stipulated under Bulk Regulations, E. sub-section of this section. 2. The yards and open spaces adjoining the boundaries of the project shall not be less than the yard requirements of the district in which it is located. 3. No building is permitted to exceed the height limit of the district by more than 10 percent. 4. If more intensive uses (i.e.. uses other than which the district is zoned, such as B2 Community Business District usage in R3 General Residence Districts) are granted than are permitted by the district regulations, there must be clear evidence that such uses are needed to service the project, provided the Planning and Zoning Commission shall find: a. That the uses permitted by such exceptions are necessary or desirable and are appropriate with respect to the primary purpose of the development; b. That the uses permitted by such exception are not of such a nature or so located as to exercise a detrimental influence on the development nor on the surrounding neighborhood; c. That not more than 15 percent of the gross floor area of such development shall be devoted to the uses permitted by said exception; d. That in a Planned Industrial Development such additional uses allowed by exception shall conform with the performance standards of the district in which the development is located; e. That the use exceptions so allowed are recorded on the zoning district maps by appropriate symbols or by reference to documents on file with the Building Commissioner; f. Where the planned development is to be located in a residential district, no use exceptions shall be allowed unless the size of the planned development exceeds 10 acres. 5. The amount of off-street parking must be adequate to serve the needs of the projects, and the Village Board may require more off-street parking than is otherwise required by this ordinance. 6. If any open space or recreational facility is to be used solely by the residents of the project unless the development is under single ownership, adequate provisions shall be made for assessments against the property within the project so that such facilities can be properly improved, maintained and operated. 7. Underground utilities including communications and electric systems, are required within the limits of a planned development. Appurtenances to these systems which can be effectively screened may be excepted from this requirement if the Village Board finds that such exemption will not violate the intent or character of the development. E. Bulk Regulations. [back to top] In the case of any Planned Development, the Planning and Zoning Commission may recommend, and the Village Board may authorize, exceptions to the applicable bulk regulations of this section within the boundaries of such development, provided that the Planning and Zoning Commission shall find: (12-06) 1. That such exception shall be solely for the purpose of encouraging a desirable living environment no less beneficial to the residents or occupants of such development, as well as of neighboring properties, than would be obtained under the bulk regulations of this ordinance for buildings developed on separate zoning lots. 2. The maximum parcel coverage in a residential planned development may not exceed 30 percent in the residential zoning districts. 3. Other standards for density, yard regulations, parking, loading and screening for a planned development shall be governed by the standards of the residential, commercial or industrial zoning district(s) most similar in nature and function to the proposed planned development as determined by the Village Board. Standards for public improvements shall be governed by the applicable ordinances and laws of the Village. Exceptions to these standards by the Village Board are possible when they find that such exceptions are warranted in terms of the total proposed development. However, in regard to developments containing residential uses; a. In no event shall the floor area ratio exceed more than 15 percent over that prescribed in this ordinance for the district in which it is located. b. In no event shall the minimum square footage per dwelling unit requirements applicable to such districts be decreased by more than 15 percent. A further decrease of not more than 10 percent on the already reduced square footage per dwelling unit may be permitted in the event that parking facilities are provided either underground or in the building proper, i.e. for each underground or on-building parking space, an equivalent reduction may be permitted to the allowable limit of 10 percent before specified. F. Issuance of Permits. [back to top] Whenever the Village Board approves the final plan and accompanying agreements, the Building Commissioner shall issue the necessary permits for all of the project or for such units thereof that are to be constructed. G. Time Limit. [back to top] If no construction has been started within one year from the date of approval of the final plan, the permits shall be declared null and void and the project shall not be initiated unless it is resubmitted and reapproved in the same manner that it was approved in the first instance. The Village Board may, however, extend the period for initiating construction upon a showing of good and sufficient cause. H. Performance. [back to top] At the time of the granting of the permit, the Village Board shall make appropriate arrangements with the applicant which will insure the accomplishment at the scheduled times, of the public improvements and grants of easement shown on the approved final plan. SECTION VIII. OFF-STREET LOADING AND OFF-STREET PARKING A. Off-Street Loading. [back to top] In connection with any building or structure which is to be erected or substantially altered, and which requires the receipt or distribution of materials or merchandise by trucks or similar vehicles, there shall be provided off-street loading berths not less than the minimum requirements specified in this section. 1. Location. All required loading berths shall be located on the same lot as the use to be served and no portion of the vehicles shall project into a street or alley. In Manufacturing Districts, no loading berth for vehicles of more than two-ton capacity shall be located less than 50 feet from any Residence District. No permitted or required loading berth shall be located within 25 feet of the nearest point of intersection of any two streets, nor shall it be located in a required front yard or side yard, except in an M2 District an open off-street loading space may be located in a part of a front yard, provided not more than 30 percent of the front yard is so occupied. 2. Size. A required off-street loading berth shall be at least 10 feet in width by at least 80 feet in length (02-01), exclusive of aisle and maneuvering space, and shall have vertical clearance of at least 14 feet, except in an M2 District an open off-street loading berth which is in existence on the effective date of this ordinance and located within a front yard or a side yard adjoining a street may be not less than 27 feet in length and at least 10 feet in width. 3. Access. Each required off-street loading berth shall be designed with appropriate means of vehicular access to a street or alley in a manner which will least interfere with traffic movements and shall be subject to approval of the Village Engineer of the Village of Addison. A loading area shall be designed to permit vehicle ingress and egress with only on-site maneuvering of the delivery vehicle. No part of the vehicle shall extend onto any right-of-way or encroach onto other adjacent lots, except when, in the case of an adjacent lot, a covenant or an easement, approved by the Director of Community Development and recorded with the County, is provided. (Ord. 05-116) 4. Surfacing. All open off-street loading berths shall be improved with a compacted macadam base not less than 7 inches thick or equal, surfaced with not less than 2 inches of asphaltic concrete or some comparable all-weather, dustless material. 5. Repair and Service. No storage of any kind nor motor vehicle repair work or service of any kind shall be permitted within any required loading berth. 6. Space Allowed. Space allowed to any off-street loading berth shall not while so allocated be used to satisfy the space requirements for any off-street parking facilities or portions thereof. 7. Required Loading Berths. For the uses here listed, loading berths shall be provided as specified: a. Auditorium; banks, business and professional offices or public administration buildings; bowling alleys; hospitals, schools, colleges, sanitariums, and other similar institutional uses; and hotels or private clubs and lodges: For such a building containing 10,000 to 100,000 square feet of floor area or fraction thereof in such a building, one loading berth. For each additional 100,000 square feet of floor area or fraction thereof in such a building, one additional loading berth. b. Manufacturing, fabricating, assembly, disassembly, warehousing, storing, cleaning, servicing, testing and repairing establishments. For such a building containing 5,000 to 40,000 square feet of floor area, one loading berth. For such a building containing 40,000 to 100,000 square feet of floor area, two loading berths plus one additional loading berth for each additional 100,000 square feet of floor area or fraction thereof. c. Retail stores, furniture and appliance stores, household equipment and furniture stores, repair shops, wholesale stores, and establishments handling the sale and consumption of food on the premises. Loading berths in accordance with the following schedule:
e. Other Uses. Off-street loading berths shall be provided in accordance with requirements determined by the Village Board based upon requirements heretofore set forth for the most similar cases. (See exceptions B4 District.) B. Off�€‘Street Parking. [back to top] Any off-street parking space in connection with existing buildings or structures shall not be removed, enlarged, or altered except in conformance with the requirements of this section. In connection with any building or structure which is to be erected or substantially altered, and which requires off-street parking spaces; there shall be provided such off-street parking space in accordance with regulations set forth hereinafter. The erection or substantial alteration of any building or structure shall be deemed a "new use" for purposes of this subsection. 1. Use. Except as may otherwise be provided for the parking of trucks or for special uses, required accessory off-street parking facilities required as accessory to uses listed herein shall be solely for the parking of passenger automobiles of patrons, occupants, or employees. 2. Location. Parking spaces shall be located on the same lot as the use served except uses, other than single or two-family dwellings, which are in existence on the effective date of this ordinance which are subsequently altered or enlarged. New uses in the B2 Business Districts and M2 General Manufacturing Districts may be served in accordance with requirements of this subparagraph by parking facilities located on land other than the lot on which the building or use served is located; provided such facilities are located within 300 feet walking distance from the main entrance to the use served. 3. Computation. When determination of the number of off-street parking spaces required by this subsection results in a requirement of a fractional space, any fraction of one-half or less may be disregarded, while a fraction in excess of one-half shall be counted as one parking space. 4. Collective Provisions for Non-Residential Uses. Off-street parking facilities for separate uses may be provided collectively if the total number of spaces so provided is not less than the sum of the separate requirements of each such use; and if all regulations governing the location of accessory parking spaces in relation to the use served are observed. However, no parking space or portion thereof shall serve as the required space for more than one use unless otherwise authorized in accordance with this section. 5. Repair and Service. No motor vehicle repair work of any kind shall be permitted in parking lots. No gasoline or motor oil shall be delivered or conveyed in conjunction with any accessory parking facilities unless (a) such facilities are located within a completely enclosed building; (b) gasoline and motor oil may only be delivered within such building to the users of such facilities; ( c) the gasoline and/or motor oil shall not be delivered for retail sale; (d) no advertising sign is visible from outside the building; and (e) all gasoline pumps shall be effectively screened from view of the street. 6. Dimensions of Parking Spaces. Required off-street parking spaces shall be not less than 9 feet in width and not less than 18 feet in length in all districts. Each parking space shall be delineated by a yellow or white delineator line not less than 4 inches in width. The width of a parking space shall be measured from the center point of the delineator line. The dimensions of a parking space shall not include access drives, aisles, ramps, columns, and office or work area. Parking spaces shall have vertical clearance of at least 7 feet. The dimensions of handicap parking spaces shall comply with the requirements of the Illinois Accessibility Code, nor shall this provision apply to the dimensions of loading or truck parking spaces as specified elsewhere. (01-23) 7. Access. Each required off-street parking space shall open directly upon a driving aisle or a driveway of such width and design as hereinafter provided as to provide safe and efficient means of vehicular access to such parking space. A driving aisle designed for two-way traffic use shall have a minimum width of at least 24 feet and shall be marked with directional arrows. A driving aisle for one-way traffic shall be marked with directional arrows and shall have a minimum aisle width as follows: For 45 degree or less parking: minimum 15 foot wide driveway aisle (02-01) All off-street parking facilities shall be provided with appropriate means of vehicular access to a street, alley or driveway in a manner which will least interfere with traffic movements. All parking areas, regardless of the number of spaces, shall have vehicular access to them via a street, alley or driveway containing all-weather, hard-surfaced pavement, and the location and route of such access shall be identified. No driveway across public property shall have a width exceeding 24 feet, exclusive of curb returns. The Zoning Administrator may grant a variation in driveway widths from 24 feet to 35 feet. A variation can be granted only when the Zoning Administrator establishes the following: a. That the variation will not conflict with any state requirement. b. That the variation can only be granted on a primary street. c. That the variation is necessary to protect the public safety and welfare. 8. In Yards. Off-street parking spaces shall not be permitted in required yards, except as hereinafter provided. In business districts and manufacturing districts, off-street parking may be located (a) in front yards provided that the parking area is set back at least 10 feet from the property line or adjacent street; and (b) in rear or side yards provided that the parking area is set back at least 5 feet from the property line. (92-01) 9. Design and Maintenance of Off�€‘Street Parking Areas. All off-street parking areas shall be improved in accordance with the applicable sections of the Building Code and shall further comply with the following conditions: a. Open parking areas shall be blacktopped. b. A perimeter curbing, constructed of cast-in-place concrete curbs shall be provided. c. The parking area improvements shall be maintained in a good and usable condition by the owner. d. All maintenance and snow removal must be done by the owner. e. Access to said parking places must be obtained through ramps or aisles and not over the curbing or provided parkway. f. The owner is to be responsible for any replacement of blacktop to said parking area necessitated by the Village's repair of underground facilities. g. Handicapped parking spaces shall be provided in accordance with the Illinois Accessibility Code P.A. 85-484; Ill. Adm. Code 400.110), as now existing or hereafter amended. 10. Open and Enclosed Parking Spaces. Accessory parking spaces located on the same lot as occupied by the use served may be open to the sky or enclosed in a building. Accessory parking spaces located elsewhere than on the same lot occupied by the use shall be open to the sky. 11. Screening and Landscaping. All yards or setback areas is set back at least 10 feet from the property line or adjoining the parking area shall be landscaped and maintained with trees, berm and other planting materials as per the plans and drawings approved by the Village. In addition, the following landscape design shall be provided: a. All parking areas with more than 30 parking spaces facing each other shall have 5-foot wide landscaped islands with trees. The curbing on the island shall be cast-in-place concrete slabs. b. The trees planted in the parking lot shall be at least 2�€‘1/2 inch diameter at base height and 40 feet apart. c. Parking areas in business districts abutting residential districts shall be screened by a 10-foot landscaped setback buffer and a densely planted compact hedge not less than 5 feet in height. In addition, a fence not less than 5 feet high, nor more than 6 feet high, may be utilized. d. Parking areas in manufacturing districts abutting residential uses shall be screened by a 30-foot landscaped setback buffer and a densely planted compact hedge not less than 5 feet in height. In addition, a fence not less than 5 feet high, nor more than 6 feet high, may be utilized. e. Car overhang is prohibited in the landscaped area. 12. Lighting. Illumination of an off-street parking area shall be arranged so as not to reflect direct rays of light into adjacent residential districts and streets. All lighting shall be extinguished no later than 30 minutes after the close of business of the use being served, except as may otherwise be authorized by the Village Board. (See exception B4 District). The following applies only to residential districts and is not intended to apply to business and manufacturing districts. a. Detailed drawings are to be submitted with respect to lighting of all parking areas containing 8 or more spaces. Said drawings shall be submitted at the time application is made for a building permit in R3, R4 and R5 zoning districts. If a parking area contains less than 8 spaces but, when added to a contiguous area of parking, would result in total parking area of more than 8 spaces, such drawings shall be required. b. In any residential district where there is continuous strip parking with common entrances and aisles totaling 8 spaces or more, lighting shall be required as in an R3, R4 and R5 district. c. Such drawings shall show location of light supports (which may be affixed directly to the building), direction of light beams, heights, and number of lights. d. Light beams shall be directed so as not to affect or disturb adjacent properties or traffic on adjacent streets. Parking lots in R3, R4 and R5 districts shall be illuminated from sunset to sunrise and shall be triggered with photoelectric cells or other automatic means as approved by the Land Use Committee. 13. Required Spaces. Off-street parking spaces accessory to designated uses shall be provided as follows (when parking spaces are to be determined by number of people, the occupant load shall be calculated per the Addison Building Code): a. Single-Family Dwellings. At least two parking spaces for each dwelling. b. Two-Family Dwellings. At least two parking spaces for each dwelling unit. c. Multiple-Family Dwellings. At least two parking spaces for each dwelling unit (see exceptions, R4 and R5 districts). d. Hotels, Motels and Apartment Hotels. At least five parking spaces plus one for each separate lodging room. e. Boarding and Lodging Houses. At least two parking spaces plus one parking space for each three persons for whom living accommodations are provided. f. Private Clubs and Lodges. At least two parking spaces plus one parking space for each three persons according to the occupant load of the building. g. Schools, Elementary or Junior High, Public or Private. Two parking spaces per classroom (see subsection j hereinbelow). h. Schools, High, Public or Private. At least one parking space of design capacity for each three students (see subsection j hereinbelow). i. Religious Institutions and Churches. At least one parking space for each three seats or 54 inches of seating space in all auditoriums with fixed seating. At least one space per three persons for all auditoriums and classrooms without fixed seating, based on occupancy codes. One space per 250 square feet of office floor area. (Ord. 05-116) j. School and Institutional Auditorium or Gymnasium. At least one parking space for each person employed on the premises, and an additional parking space for each three seats or 54 inches of seating space in the main auditorium or assembly hall. k. Theater. At least one parking space for each two and one half seats in the theater and one for each employee. l. Hospitals. At least one parking space for each two hospital beds plus one parking space for each employee or doctor assigned to the staff. m. Libraries and Museums. At least one parking space for each 500 square feet of floor area. n. Recreational Buildings or Community Centers. At least one parking space for each employee plus one parking space for each three persons according to the occupant load of the building. o. Medical and Dental Clinics. At least three parking spaces for each examining or treatment room plus one parking space for each employee or doctor in the building. p. Public Utility and Public Service Uses. At least one parking space shall be provided for each employee, plus parking spaces in adequate numbers to serve the visiting public. Parking shall be calculated for the type of building and for the type of use group for which the building was designed. q. Establishments Handling the Sale and Consumption on the Premises of Food and Refreshment. At least one parking space for each two persons according to the following methods of calculation: (1) In rooms or spaces with fixed seating, the occupancy content shall be the actual number of seats provided. When no divisions between seats are provided, fixed seating shall be computed at 18 inches per person. (2) In rooms or spaces without fixed seating, the occupancy content shall be one person per every 15 square feet of floor area. (Excluded from this calculation are areas occupied by elevators, toilet rooms, stairways, other shaft enclosures, and by permanent fixtures such as bars, cigar counters, exit facilities, entrance vestibules, lunch counters, serving spaces for same, etc.) Restaurants located within a shopping center shall provide parking spaces in accordance with requirements set forth in the 1982 edition of the Urban Land Institute's "Parking Requirements for Shopping Centers." r. Bowling Alleys. At least 5.25 parking spaces for each alley which includes affiliated uses, such as restaurants, bars, etc. s. Banks, Savings and Loans and Financial Institutions. At least one parking space for each 300 square feet of floor area. t. Business and Professional Offices or Public Administration Buildings. At least one parking space for each 250 feet of floor area. u. Automobile Service Stations. At least one parking space for each employee, plus two for each service stall. v. Gasoline Mini-Mart Type Uses. At least one parking space for each employee and one parking space for each 250 feet of floor area. w. Undertaking Establishments and Funeral Parlors. At least 15 parking spaces for each chapel or parlor, plus one parking space for each funeral vehicle maintained on the premises. x. Retail Stores. In buildings with 0 - 9,999 square feet of floor area, a minimum of one parking space for each 180 square feet. y. Manufacturing, Fabricating, Storing, Cleaning, Testing, Assembling, Repairing or Servicing Establishments. Newly constructed single unit buildings, being structures which are occupied by only one tenant, shall have a minimum of one parking space per each 250 square feet of office floor, area, and one parking space per each 1500 square feet of warehouse floor area. Existing single unit buildings, to which increased floor area is to be added after the effective date of this subsection, shall have a minimum of (i) one parking space per each 500 square feet of existing office floor area; (ii) one parking space for each 2,000 square feet of existing warehouse floor area; (iii) one parking space for each 350 square feet of increased office floor area; and (iv) one parking space per each 1,500 square feet of increased warehouse area. In single unit buildings constructed after the effective date of this subsection, the office floor area will be considered 15 percent of the total square floor area of a building unless shown otherwise. Multi-unit buildings, being structures which are occupied by more than one tenant, including office and warehouse areas, shall have a minimum of eight parking spaces per unit up to 3,000 square feet and one additional space per each 1,000 square feet over 3,000 square feet. Existing multi-unit buildings, to which increased floor area is to be added after the effective date of this subsection, shall have a minimum of; (i) one parking space per each 500 square feet of existing office floor area; (ii) one parking space per each 2,000 square feet of existing warehouse floor area; (iii) one parking space per each 350 square feet of increased floor area; and (iv) one parking space per each 1,500 square feet of increased warehouse area. The parking spaces herein required shall only be used for employee or customer vehicles. Parking spaces located in front of overhead doors do not qualify in fulfilling minimum parking space requirements. This subsection applies to all new construction after the effective date of this subsection and to existing buildings in which there is an increase in office or warehouse floor area or building-dimensions. If required parking is located on an adjoining lot, the lots shall be resubdivided into a single lot. If required parking is located on a non-adjoining lot, an agreement shall be recorded on the titles of both lots to prevent the sale of one lot independent of the other without providing parking in compliance with this subsection for each lot. (92-01) z. Other Uses. Parking spaces on the same basis as required herein for the most similar use shall be determined by the Village Board (see exception in B4 District). (88-53) 14. Variations. After a hearing before the Planning and Zoning Commission, the Village Board of Trustees, in accordance with the standards for variations set forth in Article IX, may grant variations with respect to the size, dimensions or number of parking spaces required under this Article. (92-1; 12-06) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The content of this site is provided as a reference only. Information contained here can be confirmed through the Village of Addison's Village Clerk's Office. The information here is updated approximately every 3 to 6 months and will not include any changes made since the date at the top displayed.
|